Salesforce | Rich RCS - Rich cards and carousels
Rich RCS lets you send RCS messages as cards and carousels - an image, a title, a description, and up to four buttons per card - built once in SMS Templates and sent from a report, a list view, or a conversation.
Before you start
You need three things in place:
Sinch SMS for Salesforce 1.85 or later installed in your org.
An RCS sender. Rich cards only appear when you pick a sender shown as RCS (Agent name). If you don't see one, your RCS agent isn't live on your Sinch account yet.
Access to the Sinch SMS Lightning app, where SMS Templates lives.
RCS also depends on the recipient. Rich cards reach people whose handset and carrier support RCS. Everyone else needs SMS fallback.
Build a rich card or carousel
Open SMS Templates in the Sinch SMS Lightning app and click New.
Choose the Object the template is for, such as Lead or Contact. This is required to ensure the rest of the process can be followed.
Give the template a Template Name.
Choose an RCS sender. The rich card editor replaces the plain message box, and the channel label at the top right changes to RCS.
At the top of the editor, pick Rich cards.
Start from a layout (Product carousel, Promo card, Event invitation, or Featured product) or from a blank card.
Fill in the card:
Media (a PNG, JPG, or GIF up to 2 MB)
Title (up to 200 characters)
Description
Buttons (up to four, each a reply, a link, a call, or a location)
To make a carousel, click New card. You can have up to 10. Switch between them with the tabs above the card, drag to reorder, and duplicate a card to save time.
Set Card height to Medium or Large. It applies to every card.
Use Apply to all cards if you want one card's buttons on all of them.
Click Save Template. Template saved successfully appears next to the button.
Adding each recipient's own data
Use Insert field in a title or description to add a merge field such as {!FirstName}. The phone preview fills it with the first recipient's data, and Preview with a record fills it from a real record you choose.
Sending text with buttons instead
Pick Text message at the top of the editor for a plain text RCS message with up to four buttons, which the recipient sees as suggestion chips.
Set up SMS fallback
Not every phone can receive RCS. SMS fallback sends those people a plain SMS instead, so no one is missed.
Below the card editor, tick SMS fallback.
Choose the fallback sender - a plain SMS or MMS number.
Write the fallback message.
Save the template.
Both the sender and the message are required once you tick the box. The template won't save without them.
After you set it up, the phone preview gains an SMS tab. Switch to it to check what fallback recipients will see. Fallback is stored on the template, so it travels with the template wherever it's sent from.
Test before you send
A carousel is hard to judge from a screen preview. Send yourself a test first.
Save the template. Send test sends the saved version, not what's on screen.
Click Send test.
Type a mobile number with its country code, such as
+61400000000.Send, then check the message on the handset.
Send test is available for RCS templates only.
Two additional checks:
Dark preview shows the cards in dark mode, where a logo on a white background can disappear.
Preview with a record fills the merge fields from a real record, so you catch an empty
{!FirstName}before your customers do.
Send a rich RCS message
The template is the same everywhere. Where you send from depends on who you're sending to.
To everyone in a report - SMS for Report
Open the SMS For Report tab, choose your report, and click Send SMS. Choose your RCS sender, then pick the RCS template. It replaces the text box with a read-only card. Check Recipients at the top before you send. The clock button next to Send SMS schedules it instead.
To records you pick from a list view - Bulk SMS Manager
Open Bulk SMS Manager, choose the object and list view, and tick the people you want. Your selection is kept as you page through. On step 2, choose the RCS sender and pick the template. Step 3 summarizes everything before you send.
RCS from the Bulk SMS Manager sends right away. Schedule for later is off for RCS.
To one person - Message Feed
Open the Lead, Contact, or other record, scroll to the Message Feed, and click Change to pick the RCS sender. Open the template picker and choose the template. It shows as a read-only card with that person's data already merged. Click Send.
The template applies to that message only. The next message starts as plain text again.
Turning a template into editable text
In any of these, Edit as text converts the template into plain text you can change. It then sends as a normal message, not as cards.
Troubleshooting
Symptom | Cause | Fix |
|---|---|---|
No rich card editor on the New Template page | The selected sender isn't an RCS sender | Choose a sender shown as |
My RCS template isn't in the template picker | The picker only offers templates the selected sender can send, for the object you're sending to | Check the sender is an RCS sender, and that the template was built for this object. Reopen the picker - each opening starts from the whole list. |
Save Template does nothing | A required part is missing | Check that Object is set. The page shows how many card issues are left to fix. If SMS fallback is ticked, its sender and message are both required. |
The image is refused | Wrong type or too large | RCS card media must be a PNG, JPG, or GIF up to 2 MB. Your text is kept - just swap the file. |
A warning says the template will go out as plain text | The sender was changed to one that can't send RCS | Switch back to an RCS sender, or accept the plain text send. |
Schedule for later is greyed out | Scheduling in the Bulk SMS Manager covers SMS and MMS only | Use SMS for Report, which schedules RCS, or send now. |
The carousel shows as one card on the handset | Only one card was added | Use New card to add more. Two or more cards make a carousel. |
Recipients got an SMS, not cards | Their handset or carrier doesn't support RCS, so SMS fallback ran | This is working as designed. Check the fallback message reads well on its own. |
Some recipients got nothing | They opted out, or have no number in the chosen phone field | In the Bulk SMS Manager these show Opted out or No number. Check the Send to field - the number may be in a different field. |
Merge fields are blank in the sent message | The record has no value in that field | Use Preview with a record before sending to catch this. |
Send test isn't doing anything | It sends the saved template | Save the template first, then send the test. |
Edits to a template didn't reach messages already sent | Working as designed | Changing a template has no effect on messages already sent. |